You can add orders manually on a resident’s or applicant’s Manage Orders page when your community does not have a pharmacy integration or needs to add an order quickly.
A pharmacy integration saves entry time and keeps order details aligned with your pharmacy. See How to Process Incoming Pharmacy Orders.
Access Manage Orders
To access: Open the resident’s or applicant’s Manage Orders page in any of these ways:
- Enhanced Navigation: Click Clinical in the sidebar > MAR > Manage Orders.
- Legacy Navigation: Medications > Manage Orders, select the resident, and click Manage Orders.
- Resident or applicant profile: Click Manage Orders beneath the resident’s photo.
- Any medications page (Pass Meds, Administer PRNs, Pharmacies, medication reports): Click the resident’s name.
Enhanced/Legacy Navigation
This is where you can locate a specific resident's Manage Orders page. You can also download MARs and Physician Orders in bulk from here. Read these How do I print MARs for all or multiple residents? and How do I view and print Physician’s Orders for all residents? for more details.
Resident Profile
How-To: Add a New Order
Step 1: Choose the order type
On the Orders tab, select the order type in the left column (Routines, PRNs, Treatments, or Informationals), then click the add button for that section, such as +Add Routine or +Add PRN.
Note: For instructions on how to manually add Informational orders, see Informational Orders.
Step 2: Add prescription details
In Prescription & Refill Information, track prescription dates and upload a copy of the prescription. This section does not affect the MAR or Pass Meds.
Step 3: Complete Initial Order Information
Required fields are Medication Name, Route, and Instructions. Complete the optional fields too, since they display on Pass Meds, the MAR, and Physician Orders.
- Medication Name: Type the name, strength, and form to search the drug database.
- Drug Package: Select the package and NDC number to show the medication image and adverse reactions. Requires the ALIS Drug Database feature. See ALIS Drug Database Reference Guide.
- Equivalent to: The brand name equivalent of a generic medication, so med passers recognize it.
- Prescriber: Select a resident contact tagged as a Medical Contact, such as a primary care provider or specialist.
- Route: Select how the medication is given.
- Instructions: Enter complete instructions without abbreviations. If you add a vitals check, include what to do when vitals are out of range.
-
Service Level: Preselects your community’s default, shown in the panel on the right. Change it if this order is handled differently.
- Administer: Appropriate for most orders under most licenses, except Florida.
- Assistance: The alternative to Administer for Florida licenses.
- Self-Administered: For residents who give their own medication. Choose whether the order shows in the MAR and the Med Pass. Most communities check Show in MAR and uncheck Show in Med Pass.
- Third Party: Same options as Self-Administered. Usually shown on the MAR but not in the Med Pass.
- Nurse Only: Available when Administer is selected. See Nurse-Only Orders.
- Goal: Enter the physician’s stated goal, if your state requires it.
- Physical Description: Describe the medication’s appearance, if needed.
Step 4: Complete Order Details
- Medication tags: Check every tag that applies, such as Narcotic Drug, Antibiotic, Crush, or Do Not Crush. Tags display as badges and can be used to filter reports. Your community can customize this list in Medications Settings.
- Diagnosis: Enter the diagnosis for the order. It appears next to the order on the Physician Orders document.
-
Product Expiration Date and Use By Date: Optional dates for Routine and PRN orders. Hover the (i) icon on either field for a quick explanation.
- Product Expiration Date: The date set by the manufacturer for a factory-sealed product.
- Use By Date: The date set by the pharmacy when a product is repackaged, compounded, or reconstituted.
- Both dates display on Pass Meds and Manage Orders, highlighted starting one day before the date and again once it has passed. Dates are read-only in Pass Meds and can be edited from Manage Orders. See What are the Product Expiration and Use By dates on medication orders?
- Patch: Select Yes for patches. Med passers enter the patch location, see the previous location, and can schedule apply, remove, or replace steps in the dose area.
- Injection: Select Yes for injections. Med passers enter the injection site and see the previous site.
- Check Pain Level: Select Yes to require a pain level before the order can be recorded. This provides med passers the option to enter a level from 0 to 10 or calculate one with the PAINAD scale.
- Check Vitals: Select Yes, check each vital to record before administration, and optionally set a Scale Type range. See How to Record Vitals.
- Drug Count: Select Yes to enter the quantity on hand or link the quantity to another order. Available when Drug Count is on. See How to Enable Medications for the Drug Count.
Step 6: Set Scheduling & Dosage (Routines & Treatments)
Required fields are Drug Unit of Measurement, Start Date, Interval, Dosage Type, Dose, and Time.
- Drug Unit of Measurement: Select the unit the dose is measured in. The most common option is TABS. When you change this field, the Dose field updates to match. The list shows only the units your company and community have enabled, and MISC is always available. See Drug Units of Measurement Abbreviations.
- Packaging: Leave at Based on Dose (default). Change to As 1 Packed Unit only for Drug Count orders packaged as partial pills in a bubble pack.
- Min. Interval Between Admins: The minimum time between doses, up to 72 hours in 30-minute increments. The order shows WAIT if it is too soon to give it. Not needed for Routines.
- Track Acetaminophen: Available on Routine and PRN orders. Select Yes for orders that contain acetaminophen. Pass Meds shows a warning when the resident’s acetaminophen total is approaching or exceeding 3,000 mg in the last 24 hours.
- Start Date: The date the schedule starts.
- End Date: Leave blank for most orders. Set it for orders that stop on a set date, such as antibiotics or tapering doses. The order discontinues automatically.
- Interval: The days the order is scheduled after the start date. Review the resident’s MAR afterward to confirm the schedule.
- Dosage Type: Most orders are Fixed. Sliding Scale is mainly used for insulin based on blood glucose. See Sliding scale vitals check on medication orders.
- Dose: The number of units given at each time. Check Dose is different per time if amounts vary.
- Time: Select a med pass shift, then a specific time. Click the green + to add more times.
- +Add Another Schedule: Use only for tapering or alternating dose orders, not for adding a time to a simple order. See How to enter a tapering dose medication and How to enter an alternating dose medication.
Important: The Start Date cannot be edited after the order is created.
Step 6: Set Administration & Dosage (PRNs)
PRNs use the same fields as Step 6, plus:
- Min. Interval Between Admins: The minimum time between doses, up to 72 hours in 30-minute increments. The order shows WAIT if it is too soon to give it.
- Max. Admins. in 24 Hours: The number of times per day the order can be given.
- Check and Record Outcome: The time after administration when med passers must record an outcome. One hour fits most orders. Outcomes not recorded in time show as overdue.
Tip: Use Min. Interval Between Admins and Max. Admins. in 24 Hours together for instructions such as “every 2 hours, up to four times per day.”
Step 7: Review Med Pass Scheduling Information (Routines and Treatments)
Confirm the order will start in Pass Meds when you expect:
- Med Pass Schedule: Set to Yes by default so the order is scheduled in Pass Meds.
- Start Date and Start Time: Pre-populate with today’s date and the current time. Verify they align with the order’s Start Date and first administration time.
Step 8: Create Order
Click Create Order at the bottom right.
For Routines and Treatments scheduled for a med pass shift in progress, an Add to Current Med Pass window opens. Answer both questions, then click Ok:
- Has this medication been passed to the resident already? Select No if the dose still needs to be given.
- Would you like to add this medication to the current med pass shift? Select Yes to add the order to the current shift with a status of Outstanding. Select No to start the order with its next scheduled administration.
See How to add meds scheduled for the recent past to Pass Meds.